Are you in the market for a fire pit that puts off a great amount of heat but does not take up much room? How about one that produces very little smoke and leaves behind smaller amounts of ash? The Pellet Fire Pit from Flame Genie will do exactly that!

The Flame Genie Pellet Fire Pit is a revolutionary concept; it burns wood pellets rather than firewood and uses a gravitational after burner system. This eliminates the excess smoke and the need to keep large stacks of firewood nearby. This makes it very convenient when taking it on the go with you.

The Unique Experience of a Flame Genie Pellet Fire Pit

The question on everyone’s mind is what makes this fire pit stand out from all of the rest? Well that is a simple answer… its genius design!

The Flame Genie Pellet Fire Pit has a mesh bottom grate that allows air to flow through aiding in the pellet fuels combustion. The air then flows into the heating chamber. The pellets do not catch fire right away, they release smoke and gases that rise towards the top of the fire pit. The heated air is pulled back into the fire pit at the top where the super-heated air and the gasses meet causing them to ignite to produce the magical flame.

Because those gases and smoke are ignited the results also means a beautiful dancing flame that doesn’t force you to dance around the fire pit to avoid the smoke. With the Flame Genie Pellet Fire Pit there is NO SMOKE!

Firing Up the Flame Genie Pellet Fire Pit

The Flame Genie Pellet Fire Pit comes ready to use out of the box, there is not any assembly required. When you take your fire pit out of the box you just have to set in onto place where you would like to use it. A couple things to keep in mind while choosing a spot for your Flame Genie Pellet Fire Pit, it must be used on a non-combustible surface and the flame on this fire pit is larger than a conventional fire pit.

Once you have your Flame Genie ready to go all you have to do is fill it with pellets and light it. To load your fire pit fill the drum with approximately 2 ½ inches of wood pellets.

After adding the pellets I like to use a fire starter to get the fire going. Just light the fire starter and place it on top of the pellets. Fatwood or SafeLite fire starters work well, but you should never use any type of flammable lighter fluid.

You will not see a flame pattern from the top at first but be patient the flame will appear shortly when the pellets are completely lit. This will take about 5 minutes because the flame pattern will not start until the inner and outer cylinder walls become hot enough to establish a draft and the gases will then ignite.

The fire will start to die down as the initial pellets are consumed and you simply add more pellets with a small metal scoop or something similar. Just be careful not to suffocate the remaining flame.

When you are done enjoying your Flame Genie Pellet Fire Pit, just let the fire go out. This fire pit may be small but it is actually capable of creating an impressive flame and a ton of heat. Get yours today and start experiencing the warmth and ambiance that the Flame Genie Pellet Fire Pit offers.

If you have any further questions or would like to place your order today feel free to give our Customer Service Department a call at 1-866-667-8454. We will be more than happy to assist you!